SOLAR PANEL TO CHARGE CONTROLLER ADAPTOR KIT

$5.99

AVAILABILITY:
Renogy’s fulfillment center will remain open to ensure that you are equipped with the reliable energy solution. Please note that due to an increase in order volume, there may be a slight delay. Thank you!

Categories: ,

Description

DESCRIPTION

The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes solar connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W.

Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer’s unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller.

If you have any questions regarding this product, please call us at 1 (909) 287-7111 or email support@renogy.com.

KEY FEATURES

  • Hard plastic connectors at each end.
  • Female and male connectors for an unbreakable connection.
  • Weatherproof, insullated wiring.
  • Exposed ends for connection to the solar charge controller.
  • Essential for off-grid solar power system setup.
  • Black sunlight resistant cable.
  • Extends and locks built-in cables.

PACKAGE INCLUDES

Renogy Solar Adaptor Kit

Renogy Solar Adaptor Kit

1 x

 

Specification

RENOGY 10FT 10AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 10ft AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08
Number of Wires in Conductor: 84 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 10FT 12AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 10ft AWG: 12
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97
Number of Wires in Conductor: 56 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 20FT 10AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 20ft AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08
Number of Wires in Conductor: 84 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 20FT 12AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 20ft AWG: 12
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97
Number of Wires in Conductor: 56 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 30FT 10AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 30ft AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08
Number of Wires in Conductor: 84 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 30FT 12AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 30ft AWG: 12
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97
Number of Wires in Conductor: 56 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 40FT 10AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS(A PAIR)
Length: 40ft AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08
Number of Wires in Conductor: 84 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 40FT 12AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 40ft AWG: 12
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97
Number of Wires in Conductor: 56 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 9IN 10AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 9in AWG: 10
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08
Number of Wires in Conductor: 84 IP 65 Protection
Conductor: Tinned copper wire
RENOGY 9IN 12AWG ADAPTOR KIT – CONNECTING SOLAR PANELS TO CHARGE CONTROLLERS (A PAIR)
Length: 9in AWG: 12
Rating Voltage: 600/1000V Temperature: -40°F to +185°F
Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08
Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97
Number of Wires in Conductor: 56 IP 65 Protection
Conductor: Tinned copper wire

 

WARRANTY INFORMATION

Accessories 1-year material warranty

Downloads

Reviews

There are no reviews yet.

Be the first to review “SOLAR PANEL TO CHARGE CONTROLLER ADAPTOR KIT”

Your email address will not be published. Required fields are marked *

Related products